Showing all 23 results

114 – Deck Wire Cap

$0.12
Part #114 Description: Deck wire caps are used to cover the cut ends of the small deck wires that run from the back of the shelf to the front. These are only used when the shelf has been cut on an angle to fit against...

120 – Metal Support Corner

$2.76
Part #120 Description: Metal Support Corner brackets are used to line up two adjacent shelves around a corner. The bracket simply clips over one shelf and under the other. You can adjust the quantity of this product once it has been added to the cart.

162 – 250mm Express Bracket

$4.21
Part #162 Description: The 250mm express bracket is used when a shelf will not have a wall to support the end or the shelf spans over 1200mm wide. This bracket can be used on the following shelf profiles: #7316 - 250mm Shelf & Rail #7322...

164 – 300mm Express Bracket

$4.21
Part #164 Description: The 300mm express bracket is used when a shelf will not have a wall to support the end or the shelf spans over 1200mm wide. This bracket can be used on the following shelf profiles: #7300 - 300mm Shelf & Rail #7305...

166 – 400mm Express Bracket

$5.66
Part #166 Description: The 400mm express bracket is used when a shelf will not have a wall to support the end or the shelf spans over 1200mm wide. This bracket can be used on the following shelf profile: #7320 - 400mm Linen #7325 - 500mm...

168 – Shelf & Rail Spacer Cap

$1.52
Part #168 Description: Shelf & Rail spacer caps are used on the following shelf profiles to avoid clothes hangers from running of the end of the hanging rail where an express bracket is used:

203 – Small End Cap

$0.13
Part #203 Description: Small end caps are used to cover the cut ends of most shelving profiles. The following shows how many are required per shelf: 4 x Small End Caps #7300 - 300mm Shelf & Rail #7316 - 250mm Shelf & Rail 6 x...

204 – Large End Cap

$0.14
Part #204 Description: Large end caps are used to cover the cut ends of the hanging rail on the following shelf profiles: #7300 - 300mm Shelf & Rail #7322 - 250/300mm Shelf & Rail #7304 - 250/400mm Shelf & Rail #7305 - 300/400mm Shelf &...

247 – Pole End Cap

$0.44
0 review(s)

247 – Pole End Cap

$0.44
Part #247 Description: Pole end caps are used to cover the cut ends of the support poles to provide a more aesthetically appealing finish. Each support pole requires two of these.

250 – Wall Anchor

$0.14
0 review(s)

250 – Wall Anchor

$0.14
Part #250 Description: Wall Anchors are designed to grip directly into gib board to ensure fittings are secured properly and tightly. Wall Anchors are used with the following fittings: #162 - 250mm Express Bracket #164 - 300mm Express Bracket #166 - 400mm Express Bracket #312...

312 – Saddle Clip

$0.20
0 review(s)

312 – Saddle Clip

$0.20
Part #312 Description: Saddle clips are used wherever an express bracket is used to help support any force that pulls away from the wall. One saddle clip should be used for each express bracket. Each saddle clip requires 2 x Wall Anchors (#250) and 2...

415 – End Bracket – Round Back

$2.61
Part #415 Description: Round back end brackets are attached to an angled side wall and support the front edge of the shelf. Each end bracket requires 2 x Wall Anchors (#250) and 2 x Pan Head Screws (#751)

751 – 8G x 1 Inch Square Head Screw

$0.07
Part #751 Description: This screw is used with or to fix the following fittings securely to the wall: #162 - 250mm Express Bracket #164 - 300mm Express Bracket #166 - 400mm Express Bracket #250 - Wall Anchor #312 - Saddle Clip #415 - End Bracket...

752 – Pole Screw

$0.07
0 review(s)

752 – Pole Screw

$0.07
Part #752 Description: Pole Screws are a self tapping screw used to fix Linen Pole Clips (#978) and Shelf & Rail Pole Clips (#977) onto support poles. 1 x Pole screw is required per clip.

911 – Back Wall Clip

$0.46
Part #911 Description: The back wall clip fixes into the back wardrobe wall to support the back of the shelves.

923 – Shoe Support Bracket

$3.47
Part #923 Description: Shoe support brackets are used in conjunction with a 300mm linen shelf to create a wall mounted shoe rack. Shoe support brackets still require the shelf to be fixed in to the wall with back wall clips (#911).  Linen shelves require 2...

974 – End Bracket

$1.15
0 review(s)

974 – End Bracket

$1.15
Part #974 Description: End brackets are attached to a side wall and support the front edge of the shelf. Each end bracket requires 2 x Wall Anchors (#250) and 2 x Pan Head Screws (#751)

974A – End Bracket With Anchor

$1.25
Part #974A Description: End brackets are attached to a side wall and support the front edge of the shelf. Each end bracket requires 2 x Pan Head Screws (#751)

977 – Shelf & Rail Pole Clip

$0.41
Part #978 Description: Linen pole clips are used to attach the front of linen shelves to support poles. Each pole clip requires 1 x Pole Screw (#752).

978 – Linen Pole Clip

$0.41
Part #978 Description: Linen pole clips are used to attach the front of linen shelves to support poles. Each pole clip requires 1 x Pole Screw (#752).

P1800 – Support Pole – 1800mm

$25.62
Part #P1800 Description: 1800mm high square pole used to support the front of two or more shelves or when a shelf spans over 1200mm wide. This is used with either Linen Pole Clips (#978) or Shelf and Rail Pole Clips (#977) depending on what shelving...

P2080 – Support Pole – 2080mm

$26.91
Part #P2080 Description: 2080mm high square pole used to support the front of two or more shelves or when a shelf spans over 1200mm wide. This is used with either Linen Pole Clips (#978) or Shelf and Rail Pole Clips (#977) depending on what shelving...

About nzwardrobes

We specialise in wardrobe organiser systems and shelving solutions for both new and existing homes. nzwardrobes quality wardrobe organiser systems are distributed by Union Imports NZ Ltd.